The Dimplex Exbury is an elegant electric fire whose brass effect finish and real coal fire bed will bring a quality and authenticity to any interior. Because the fire has no canopy, there is no protrusion from the fan heater, which makes this a sleek, streamlined option that can work as an impressive standalone feature, or be combined with almost any fireplace surround for a high quality, eye catching solution. Factor in the electronic thermostat and remote control for convenient room temperature management and you have a versatile, highly functional electric fire.
Fire: Brass effect finish
Compatibility: Suitable for use with wooden, marble, granite and limestone surrounds
Flame Effect: LED Optiflame
Bed Type: Natural coal
Fuel Type: Electric fire
Heat Output: 1kW heat setting. Also includes a flame effect only setting
Assembly: None required
Fitting: If fully inset the fire requires a recess of 70mm. It can also fit flat to the wall using the 70mm spacer provided
- Supplied with a remote control for convenient use
- Electronic thermostat allows you to control the room temperature
Frequently Asked Questions
The fire has no effect or the effect has changed in appearance.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. If the effect motor is still operating and heat is available, the lamps may have failed. Check and replace bulbs if necessary.
The fire has no heat.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. Check the heat selector switches are switched on. If the fire has a thermostat check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on. You could also check if the fire has been inadvertently covered in which case the safety cut-out may have operated? Switch your fire off, leave for 2 minutes and then switch back on.
The heat cuts out after short period of time.?
If the fire has a thermostat, check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on.
The remote control is not operating correctly.?
If the fire is operative on manual but the remote is not working then simply check or replace batteries.
The bulb in my Dimplex Stove has stopped working. Can I replace it?
Yes, you can simply replace the bulb with an equivalent energy saving model that you can purchase from your local DIY store.
Are the plugs easily accessible if plugged in behind the fire?
Fires must not be plugged in anywhere behind the surround or the fire. The plug must remain accessible after installation to allow the fire to be isolated in an emergency.
Can`t find the answer you`re looking for? Our experts are here to help!. Our experts are here to help!
Write a Review
Fireplace World wants to hear from you!
Mrs Linda Jones,
Mrs L Coady,