Product Information

• 1kW and 2kW heat settings • Independent flame effect only setting using Optiflame technology • Supplied with interchangeable coals and pebbles • Narrow inset depth of just 55mm, the fire is supplied with a spacer to allow it to fit flat to the wall. • Thermostat fitted for room temperature control

Dimplex Delius Chrome Electric Fire

Product Code: 2304

RRP£335.00

Our Price

£332.00

Save£3.00(0%)

Order now for delivery within 2 working days

Made to Order

Product Features

  • Electric fire has a maximum heat output of 2kW with a concealed fan heater under the canopy with high-level switches
  • 1kW, 2kW and flame only settings
  • Thermostat
  • LED Optiflame
  • Inset depth of just 55mm fully inset or can be used flat-to-wall using spacer provided
  • Choice of coal or white pebbles both supplied
  • Chrome and satin silver effect finish

Key Measurements

  mm inches
Height: 618 24.33
Width: 524 20.63
Depth: 55 2.17
  kg lb
Weight: 13.80 30.42

Frequently Asked Questions

  •  The fire has no effect or the effect has changed in appearance.?

    Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. If the effect motor is still operating and heat is available, the lamps may have failed. Check and replace bulbs if necessary.

  •  The fire has no heat.?

    Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. Check the heat selector switches are switched on. If the fire has a thermostat check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on. You could also check if the fire has been inadvertently covered in which case the safety cut-out may have operated? Switch your fire off, leave for 2 minutes and then switch back on.

  •  The heat cuts out after short period of time.?

    If the fire has a thermostat, check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on.

  •  The bulb in my Dimplex Stove has stopped working. Can I replace it?

    The bulb in my Dimplex Stove has stopped working. Can I replace it?

  •  Are the plugs easily accessible if plugged in behind the fire?

    Fires must not be plugged in anywhere behind the surround or the fire. The plug must remain accessible after installation to allow the fire to be isolated in an emergency.

Can`t find the answer you`re looking for? Our experts are here to help!. Our experts are here to help!

Call 0330 088 2060 To speak to an Expert or alternatively fill out the form below and a member of out team will get back to you.

Please tick the box for verification

    Review Summary

    5.0

    Write a Review

    Fireplace World wants to hear from you!

      Delighted with fire and service. Highly recommended. Many thanks.