It may be small, but the Dimplex Detroit is a robust and stylish electric fire that is sure to add character to your interior. The fire has a versatile chrome body, and is supplied with both coal and pebbles so you can really customise your look. Optiflame technology ensures a realistic flame effect, with a non-heat setting for use all year round. A freestanding fire that can also be fitted flat to the wall, the Detroit is both a functional and reliable choice.
- Fire: Detroit, chrome, 24 Inch
- Flame Effect: Realistic Optiflame effect.
- Bed Type: Supplied with both coals and pebbles
- Heat Output: 2kW. Also includes a flame only setting
- Fuel Type: Electric fire
- Assembly: None required
Frequently Asked Questions
The fire has no effect or the effect has changed in appearance.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. If the effect motor is still operating and heat is available, the lamps may have failed. Check and replace bulbs if necessary.
The fire has no heat.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. Check the heat selector switches are switched on. If the fire has a thermostat check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on. You could also check if the fire has been inadvertently covered in which case the safety cut-out may have operated? Switch your fire off, leave for 2 minutes and then switch back on.
The heat cuts out after short period of time.?
If the fire has a thermostat, check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on.
Is there any more information about this fire?
For additional up-to-date information, use the Dimplex website www.dimplex.co.uk
The bulb in my Dimplex Stove has stopped working. Can I replace it?
Yes, you can simply replace the bulb with an equivalent energy saving model that you can purchase from your local DIY store.
Are the plugs easily accessible if plugged in behind the fire?
Fires must not be plugged in anywhere behind the surround or the fire. The plug must remain accessible after installation to allow the fire to be isolated in an emergency.
Can’t find the answer you’re looking for?. Our experts are here to help!
Write a Review
Fireplace World wants to hear from you!
Mr Eddie Jones,
5 Millers Court
Mrs Kate F,
Mr Alan Broadley,
Ms Jean Clarke,
Mr Robert Brannan,
Mrs Rachel Habib,
Mrs Sharon Jackson,
Mrs Doreen Gill,
Stoke On Trent