Black trimmed with a sleek, chrome front, the Dimplex Zamora is a stylish and modern fire that will make an impact on any interior. The fire is supplied with both natural pebbles and coals, which when combined with the Optiflame effect creates a cosy and authentic fireside glow. Suitable for flat to wall installation with no assembly required, this is a versatile and easy to set-up fire that you’ll love to settle in front of in the evening.
Fire: Black and chrome effect finish
Compatibility: Suitable for use with wooden, marble, granite and limestone surrounds
Flame Effect: LED Optiflame
Bed Type: Natural coal and small pebbles
Fuel Type: Electric fire
Heat Output: 1kW and 2kW heat settings. Also includes a flame effect only setting
Assembly: None required
Fitting: Fits flat to the wall. No recess required.
Frequently Asked Questions
The fire has no effect or the effect has changed in appearance.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. If the effect motor is still operating and heat is available, the lamps may have failed. Check and replace bulbs if necessary.
The fire has no heat.?
Ensure mains switch is switched on. Check the fuse is OK and circuit breaker is also on. Check the heat selector switches are switched on. If the fire has a thermostat check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on. You could also check if the fire has been inadvertently covered in which case the safety cut-out may have operated? Switch your fire off, leave for 2 minutes and then switch back on.
The heat cuts out after short period of time.?
If the fire has a thermostat, check that this is not on the lower settings. If the room is warm enough, the thermostat will stop the fire switching the heat on.
Is there any more information about this fire?
For additional up-to-date information, use the Dimplex website www.dimplex.co.uk
The bulb in my Dimplex Stove has stopped working. Can I replace it?
Yes, you can simply replace the bulb with an equivalent energy saving model that you can purchase from your local DIY store.
Are the plugs easily accessible if plugged in behind the fire?
Fires must not be plugged in anywhere behind the surround or the fire. The plug must remain accessible after installation to allow the fire to be isolated in an emergency.
Can`t find the answer you`re looking for? Our experts are here to help!. Our experts are here to help!
Write a Review
Fireplace World wants to hear from you!
Mr Mike Guichard,
Mr. Jeff Marchant,
Mrs Daphne Allman,
Mr James Mcatasney,
Mr Terrance Williams,