Product Information

- White marble surround & black granite back panel & hearth.
- Integrated LED downlights.
- 1 inch rebate - Recess required.
- Suitable for electric, bio ethanol & gas inset fires.
- Assembly required - Supplied in 4 pre-assembled parts.

The Portland fireplace offers an attractive and modern focal point for your home. The white marble surround and black granite back panel and hearth is combined excellently with its LED downlights. The fireplace is supplied with a 1 inch rebate so a recess will be required when combined with an inset fire.

Portland White Marble & Granite Fireplace with Downlights, 54 Inch

Product Code: 14030

EAN: 5060031417289

RRP£789

Our Price

£659

Save£130(16%)

HOME DELIVERY ITEM

Order now and this item will be delivered within 4 weeks

Made to Order

Add to Wishlist

Product Features

Surround: White marble
Back Panel & Hearth: Black granite
Downlights: Yes
Fire Compatibility: Electric, bio ethanol & gas inset fires
Rebate: 1 inch - Recess required
Assembly Required: Yes - Supplied in 4 pre-assembled parts
Manufacturer: Adam

Key Measurements

  mm inches
Height: 1173 46.18
Width: 1372 54.02
Depth: 381 15.00
  kg lb
Weight: 140.60 309.97

Frequently Asked Questions

  •  Is this back panel suitable for solid fuel or gas fires?

    This back panel is suitable for all types of gas and electric fires but is NOT SUITABLE for solid fuel fires. For solid fuel a back panel must be "slabbed" ( this is an addition of a light concrete back cast on to the panel ) and the granite should be cut for expansion ( the granite is cut through - but not the concrete ).

  •  How can the granite be cut or drilled?

    You can use an angle grinder with a diamond cutting blade suitable for granite. It can be drilled with a suitable carbide drill bit but do NOT use hammer action setting on the electric drill. It can also be drilled with a hollow diamond core drill bit.

  •  How can the granite be cleaned or polished?

    For general cleaning, use soft soap and water (do NOT use washing up liquid) or a solution of washing soda for difficult marks. For very sticky surfaces, use white spirit. To polish, you can use a marble polish available from most hardware stores and larger supermarkets. WD40 can be used, but it does not last long before the surface loses it's shine with this technique.

  •  How can the back panel be fastened to the wall?

    This product must be installed by a suitably qualified professional. It is not suitable for DIY installation. Failure to do so may result in serious or fatal injury and/or property damage.

  •  There is a gap between the back panel and surround ?

    The back panel is not installed correctly to accommodate a deep rebate gap in the surround. If the gap is at the sides of the panel then the surround is not suitable for a standard back panel and you should ensure the dimensions are correct.

  •  What size is the back panel?

    The approximate sizes are 37" wide x 37" high x 3/4" thick (940 mm x 940 mm x 20 mm).

  •  What size is the fire cut out in the back panel?

    Approximately 16.5" wide x 22.5" high (420 mm x 570 mm).

  •  Is this hearth suitable for solid fuel or gas fires?

    This hearth is suitable for all types of gas and electric fires but is NOT SUITABLE for solid fuel fires. For solid fuel a hearth must be "slabbed" ( this is an addition of a light concrete back cast on to the hearth ) and the hearth should be cut for expansion ( the hearth is cut through - but not the concrete ).

  •  How can the hearth be cleaned or polished?

    For general cleaning, use soft soap and water (do NOT use washing up liquid) or a solution of washing soda for difficult marks. For very sticky surfaces, use white spirit. To polish, you can use a marble polish available from most hardware stores and larger supermarkets. WD40 can be used, but it does not last long before the surface loses it's shine with this technique.

Can’t find the answer you’re looking for?. Our experts are here to help!

Please fill out the form below and a member of our team will get back to you, or alternatively use our live chat facility (during operating times).

Please tick the box for verification